Read time: 5 minutes

What do vineyards and fencelines have in common?

Keeping weed numbers down in crops is a high priority on most farms, yet herbicide resistance can quietly increase along fencelines and around infrastructure. Having a ‘set and forget’ weed control option for these areas could save money and arrest the evolution of herbicide resistance in weeds.

In vineyards the under-vine area is often kept bare using a limited number of suitable herbicides, opening the door to herbicide resistance. Populations of glyphosate-resistant annual ryegrass and fleabane have been confirmed in Australian vineyards and along fencelines and roadways.

Chris Penfold, research agronomist at the University of Adelaide, Roseworthy Campus says effective living mulches can provide a long-term management solution to stop fencelines being a source of herbicide resistant weeds.

Having worked previously in broadacre cropping, and more recently in the wine industry, research agronomist Chris Penfold, University of Adelaide is interested in identifying alternative ways to manage under-vine and mid-row areas in vineyards, which also has implications for fencelines on grain and mixed farming properties.

“In many cases it might be better to replace weeds on the fencelines with a competitive but palatable option,” he says. “In vineyards, the continual use of herbicides and cultivation for weed control under the vines has a long-term detrimental effect on soil health and grape quality. Consequently, our research aimed to identify cover crop species that would build soil health and conserve soil moisture for the vines. Since this is not a priority on grain farms, a range of other options might be chosen but the principle can remain – establish permanent cover and stop fenceline spraying,” says Chris.

Of the treatments Chris included in his trial, Kasbah cocksfoot and wallaby grass stood out as competitive species that did not spread into neighbouring areas and could be suitable for controlling weeds on fencelines.

“Kasbah provided good suppression of fleabane and thistles in vineyards, especially in irrigation areas. It is a summer dormant perennial that doesn’t recruit, even in vineyards. It did suppress vine growth so it isn’t a great option for vineyards but could work for fencelines,” says Chris. “The other competitive border species we tried was wallaby grass, a native perennial, which provided good cover, but seed is expensive and it can be hard to establish. By not applying herbicide to fencelines growers will save money, which can be partly re-directed to the establishment of effective living mulches to provide a long-term management solution to stop fencelines being a source of herbicide resistant weeds.”

Perennial species and self-regenerating annuals are the preferred options to minimise on-going management costs. The best species to establish will vary markedly between regions with prostrate saltbush having potential in drier areas, and lucerne and wallaby grass providing good control, even against caltrop, in other situations. In the vineyard situation a medic plus annual ryegrass cover provided good winter weed control and soil health benefits. By not spraying the annual ryegrass herbicide resistance does not evolve.

Native perennials such as wallaby grass, can provide good cover along the borders without spreading into the crop.

Another option Chris has investigated is in-crop grazing with sheep. With living mulches growing around the borders, sheep can be allowed to graze in established crops such as chickpea, faba bean, fenugreek and lupins, at light stocking density. The sheep will preferentially graze the in-crop weeds and may also assist with weed control along controlled traffic wheeltracks, especially if weed seed is directed onto the wheeltracks using a chaff-deck for harvest weed seed control.

“Sheep are selective grazers and lambs are more selective than older sheep,” says Chris. “Different sheep breeds also graze differently so these things need to be considered for each farming system. The principle to apply is to incorporate non-chemical management practices where possible into the farming system, which should then extend the useful life of herbicides.”

Where pastures are part of the crop rotation it can be as simple as establishing the pasture species along the fencelines and leaving them in place when the paddock rotates into the cropping phase. Similarly, the crop can be sown right up to the fenceline and either mown or baled for hay prior to harvest.

Nipping herbicide resistance in the bud in non-cropping areas is an important strategy often overlooked. These areas are often sprayed when weeds are large, often using the same herbicide (usually glyphosate) each time, and there is rarely any follow-up treatment of survivors. This is a recipe for rapid evolution of herbicide resistance.

Other resources for fenceline management:

Related Articles

View all
Article
News

Never cut the herbicide application rate

Scientific studies have demonstrated that resistance can rapidly evolve in weeds subjected to low doses of herbicide. Some weeds can develop resistance within a few generations. Full rates when mixing herbicides too! When mixing herbicides it is important that each product is still applied at the full label rate to ensure high mortality. Applying different chemicals in one mix can provide an additive advantage. It is important to understand the mode of action of each herbicide on the plant when preparing a herbicide mix. This is just as important for pre-emergent grass weed mixes as it is for post-emergent mixes aimed at broadleaf weed control. ALWAYS READ THE LABEL. Surrounding weed seeds with a combination of pre-emergent herbicides with different modes of action can give a high level of control and help extend the useful life of all the chemicals used. The high level of control must be supported with additional control measures for all survivors. All products with different modes of action must be applied at full label rates for this to be an effective strategy.   Mixing two chemicals with the same mode of action can achieve some additional efficacy, however, the mix should deliver the combined full rate to ensure a lethal dose. The amount of stubble present and crop safety are all important considerations when mixing chemicals. For example, when using a tank mix of Avadex® and trifluralin to control ryegrass in wheat, the rates used will vary depending on the sowing system and level of stubble retention. Be sure to get good advice. Many herbicides on the market are a combination of two or more modes of action within the one product. These products must be applied at the full label rate to be effective. Having dual action does not negate the need to change herbicide products and rotate modes of action. Repeated use of any single strategy will reduce the effectiveness of that strategy over time.  
Article
News

Spray well – correct nozzles, adjuvants and water rates

Spray application is a technical field and growers need to make sure their equipment and application techniques are spot-on. The GRDC Spray Application GrowNote provides detailed information and about 80 videos to demonstrate key skills. Prevent spray-drift The focus of spraying herbicide needs to be on doing the job right so the weeds receive the correct dose and die, and this includes reducing the air borne fraction to a bare minimum. Bill Gordon’s 10 Tips for Reducing Spray Drift Choose all products in the tank mix carefully. Understand the product mode of action and coverage requirements. Select (and check) the coarsest spray quality that will provide effective control. Expect that surface temperature inversions will form as sunset approaches and will likely persist overnight and even beyond sunrise on many occasions. DO NOT SPRAY. Use weather forecasts to inform your spray decisions. Only start spraying when the sun is about 20 degrees above the horizon and when the wind speed has been above 4–5 km/hr for more than 20–30 minutes, and clearly blowing away from any adjacent sensitive crops or areas. Set the boom height to achieve a double overlap of the spray patterns. Avoid higher spraying speeds. Leave buffers unsprayed if necessary and come back. Continue to monitor conditions, particularly wind speed, at the site during the spray operation High water rates don’t have to slow you down Some growers are concerned that increasing the water rate when applying herbicide will slow down their spray operation and cost them money. However, the biggest financial loss during spraying usually comes from a failed spray job. To keep your spray operation as time efficient as possible when using more effective and reliable application volumes, you can: Use nurse tanks around the farm to reduce the time spent travelling back to a central re-fill point. Use a larger pump, e.g. 2.5 inch, to make re-filling quicker. Pre-mix the batch while the sprayer is operating. Many mixes can be held in the mixing tank for up to 6 hours. However, wettable granules and suspension concentrates will need agitation to keep them in solution. For pre-emergent herbicides in high stubble situations, carrier volume has a large effect on the level of control achieved. Across four trial sites Dr Borger’s research demonstrated that ryegrass control with trifluralin or Sakura® increased from 53% control when the carrier volume was 30 L/ha to 78% control when the carrier volume was increased to 150 L water/ha in high Water quality and mixing order Water quality is often overlooked as a possible contributor to herbicide failure and can lead to confusion over the herbicide resistance status of weeds on a property. Water should be considered as one of the chemicals in any mix, given that water quality varies markedly depending on its source. Getting the mixing order right is essential for effective spray results. Don’t start mixing until the water quality is right Podcast – Mixing herbicides Adjuvants Sometimes adding an adjuvant is beneficial and sometimes it is detrimental; and there is an art to knowing how to best deploy these additives. When weeds are susceptible to the applied herbicides, the effectiveness of adjuvants generally goes un-noticed. Correctly applied adjuvants can reduce the impact of low level herbicide resistance by helping to maximise the amount of herbicide taken up by the plant.
Article
News

Clean borders – avoid evolving resistance on the fence line

About one-quarter of glyphosate-resistant populations within broadacre cropping situations across Australia come from fencelines and other non-cropping areas of the farm. Along paddock borders, where there is no crop competition, weeds can flourish and, if not controlled, set lots of seed. The traditional approach has been to treat these weeds with glyphosate to keep borders clean but after 20-odd years this option is now failing and paddock borders are becoming a significant source of glyphosate-resistant weed seed. Weed researcher Eric Koetz said the limited options for managing weeds along irrigation infrastructure and other non-crop areas is a problem and is putting additional pressure on knock-down herbicides in irrigated systems. In some situations, cultivation can be used to kill the weeds and provide a firebreak, but on light soils this may pose an erosion risk and mowing or slashing may be safer options. Another possible tactic is to continue using herbicides but to ensure that a clean-up operation is carried out before any survivors can set seed. Some growers are choosing to increase the heat on weeds along the borders by planting the crop right to the fence and then baling the outside lap and spraying with a knockdown herbicide to kill any weeds and provide a firebreak. Another good option in some situations is to maintain a healthy border of vegetation using non-invasive grasses. In Queensland, buffel grass is a good example of a grass that can outcompete other weeds while not invading crop lands. If only herbicides are used on fencelines, resistance is inevitable. Surviving weeds on fencelines have no competition and access to plenty of soil moisture, so they set a lot of seed and resistance can easily flow into neighbouring paddocks. Other resources It’s time for a glyphosate intervention Farm hygiene cottons on – Cleave Rogan, St George What’s new in management of herbicide resistant weeds on fencelines? Keeping the farm clean – Graham Clapham, Norwin Don’t jeopardise glyphosate for clean fencelines Keeping fencelines clean Resistance risk to knock-down herbicides on irrigated cotton farms

Subscribe to the WeedSmart Newsletter