Stop those broadleaf weeds setting seed in lentils
with Matt Witney, Dodgshun Medlin, Swan Hill
Broadleaf weeds that escape control in lentil crops can significantly reduce crop yields and accelerate herbicide-resistant populations. This impacts both the short-term and longer-term viability of growing lentils.
Matt Witney, independent agronomy consultant at Dodgshun Medlin in Swan Hill, Victoria, says end-of-season management of broadleaf weeds, including purple-flowered fumitory, spiny emex, wild radish and tares, is a high priority throughout lentil-growing regions. Any weed blow-out means years of pain ahead in that paddock.
“The high rainfall experienced in many areas during the 2026 growing season has contributed to very high germination of broadleaf weeds in lentils,” says Matt. “Similar to 2022, this year is a high selection year for herbicide-resistant weeds. Allowing these weeds to contribute masses of seed to the weed seed bank will have long-term consequences, particularly for pulse production in affected paddocks.”
The weed pressure risks are particularly high where lentils are part of a short crop rotation because broadleaf weeds can gain an advantage more frequently where there is no longer-term break strategy in place.
“To get on top of this season’s weed escapes, growers need to reduce weed seed set as much as possible and destroy any seed left at harvest,” he says. “One of the most effective strategies is to combine a double-knockdown desiccation tactic with harvest weed seed control. This will reduce the number of weed seeds that enter the seedbank this year, stop weeds regenerating after harvest, reduce the soil moisture and nitrogen losses over summer, and reduce the weed pressure on future crops.”
Matt suggests growers adopt the WeedSmart Big 6 ‘keep weeds guessing’ strategy to address broadleaf weeds in lentils with a focus on a herbicide strategy that prioritises key herbicide modes of action for use in lentils and incorporates multiple tactics across the crop rotation that put downward pressure on weed numbers.
Double-knock desiccation
Desiccation and spray-topping (croptopping) are valuable late-season tactics to stop weed seed set and sterilise weed seed. This tactic also doubles as the first summer spray for fallow weeds like sowthistle, prickly lettuce and fleabane, and surviving ryegrass.
There are now four herbicides – glyphosate, paraquat*, saflufenacil (e.g. Sharpen, Group 14) and pyraflufen-ethyl (e.g. Sledge, Group 14) – registered to prepare a lentil crop for harvest. Diquat* is being phased out and being substituted with the registered Group 14 spikes for additional broadleaf weed control.
Paraquat* is registered for spray-topping (crop-topping) annual ryegrass in lentils with no change to the label rate. However, the new labels include an extended harvest withholding period from 7 days to 14 days*, which may incur grain losses prior to harvest, depending on environmental conditions. If harvest timing is critical, growers may prefer to use a registered Group 14 with a 7-day withholding period.
When using glyphosate, check that the formulation is registered for use as a harvest aid – not all formulations are suitable for this use pattern.
Saflufenacil is an effective spike, typically with paraquat, for lentil crop desiccation and reducing seed set in broadleaf weeds before harvest. It is the most soluble of the Group 14s and has a label claim to reduce seed set on fleabane, brassica weeds and thistles. It is not advised to keep seed treated with Sharpen.
Similarly, pyraflufen-ethyl improves the brownout of a range of broadleaf and grass weeds, while reducing seed-set and viability of weed seeds prior to harvest. It is safe to retain seed from crops where Sledge was applied.
All crop desiccants (glyphosate and registered Group 14s) must be applied at or after the lentil crop reaches physiological maturity and at least 85 to 90 per cent seed colour change. Once lentil seeds have changed colour, they detach from the pod and dehydrate ahead of harvest.
Growers in South Australia started testing a double-knock approach to lentil desiccation in 2013, and used the tactic to good effect in 2016, a high-weed-pressure season in South Australia. Since then, the practice has been adopted in lentil crops across South Australia, Victoria and New South Wales.
Matt says the common practice is to apply a high label rate of glyphosate followed by one of the Group 14 actives (Sharpen or Sledge), mixed with paraquat (primarily for grass weed control) two to five days later.
The double-knock is often necessary to initiate the systemic herbicide action on actively growing weeds within the dense lentil crop canopy in high-biomass seasons, and the desiccants help brown out the weeds and bring crops in faster for harvest. After harvest, weed regrowth should be very minimal as the glyphosate has translocated into the large broadleaf weed escapes.
A pre-harvest double-knock tactic adds extra cost and logistical challenges at an already busy time of year. Prioritising this tactic for weedy paddocks and high-pressure years is recommended. It is an effective tactic to reduce seed viability in fleabane that is resistant to glyphosate and/or paraquat, along with wild radish and thistles.
* The APVMA review of paraquat and diquat took immediate effect for products manufactured from 23 June, 2026. There is a two-year phase-out period for existing stock.
Herbicide and rotation strategies for lentils
Matt encourages growers to reassess their weed management programs to determine what factors might have contributed to a large number of weeds escaping control. Understanding the ‘why’ helps plan management strategies that reduce the risk of future blow-outs.
Start by looking for ways to extend and diversify the crop rotation. Short cereal lentil rotations inevitably lead to high weed numbers and herbicide resistance due to selection pressure. While weed pressure is high, lentil crops need sown less frequently, say once every three or four years. This creates a broadleaf break phase in which the crops grown make it easier to achieve near 100 per cent control of broadleaf weeds for two or three consecutive years to significantly reduce the weed seed bank.
Incorporating lentil varieties with differing herbicide-tolerance traits can also add diversity. For example, the GIA Metro lentil variety combines IMI tolerance with metribuzin tolerance, with additional metribuzin application timing options that extend the residual control period for grass and broadleaf weeds.
Using metribuzin in Metro lentils can be very effective where fumitory, emex, radish, capeweed or some types of tares are problematic. Although there is a yield penalty with Metro lentils (around 25–30%), they provide a higher return than brown manure and increase the diversity of herbicide modes of action.
Look for opportunities to implement patch management strategies, such as sacrificing the crop in weedy areas (like old fence lines within paddocks) for a future pay-off. Green-on-green spot-spraying will become increasingly applicable as the algorithms are developed to identify small weeds by leaf shape before canopy closure.
Matt says two passes with a green-on-green sprayer often results in a superior weed control outcome. The first pass may kill 80 per cent of the target weeds, and a second pass after the next flush of weeds germinates can increase the overall control to around 96 per cent.
Where possible, avoid using Intervix and diflufenican (Group 12, e.g. Brodal) in the cereal phase so there are more modes of action available for use in lentils. For example, using propyzamide (e.g. Ultro) for pre-emergent grass weed control in lentils provides superior grass weed control coupled with the early application of diflufenican to target small broadleaf weeds. This can then be followed up with Intervix if required to control harder-to-kill broadleaf weeds while providing residual activity for longer into the growing season.
A strong, diverse program of registered pre-emergent herbicide chemistry for lentils can greatly reduce broadleaf weed numbers, taking pressure off the in-crop herbicides. Some of the new Group 14s, such as Reflex or Terrain Flow, have increased the diversity of pre-emergent modes of action available for lentils.
Using a harvest weed seed control tactic, such as an impact mill, is highly recommended for all crops to reduce weed seed survival and the spread of late-maturing or herbicide-resistant weed seed.
Above all, Matt emphasises the need to recognise and address an escalating weed problem and introduce interventions that may require some short-term pain for long-term gain.
WeedSmart provides a practical planning framework and farming systems approach to integrated weed management to keep weed numbers low, maximise crop yield and improve long-term farm profitability.
